油缸磁致伸缩位移传感器

我司为Germanjet磁致伸缩位移传感器中国经销商,位移传感器棒形设计允许传感器安装在带有压力的液压缸和气压缸内。非接触式O型磁块可使位移传感器安装更为简单。除提供标准的模拟量电压和电流信号外,还提供诸如同步串行接口 SSI以及启动 / 停止脉冲这些常用接口,还具有现场总线的Canbus和Profibus以及Devicenet。

油缸磁致伸缩位移传感器

拉绳位移传感器

拉绳位移传感器是直线位移传感器在结构上的精巧集成,充分结合了角度位移传感器、直线位传感器以及齿轮、条传动的各种优点。做工精良,用料考究:传感器壳体采用硬质铝合金材质并进行阳极氧化处理,有效达到防锈防污效果;固定所用螺丝都选用高硬度合金钢材质,使得传感器更加结实牢靠。

拉绳位移传感器

16 Series磁致伸缩位移传感器简介

2015-4-20 11:46:38

  16 series is design for hydraulic cyclinder with limited head space or clevis rod ends hydraulic cyclinder. Sensing rod is made by stainless steel which installed inside the hydraulic cyclinder. It has a wide variety of signal output selection included analog voltage, current, and SSI. It is a perfect combination with hydraulic valve to form a close-loop servo hydraulic system.

  16系列磁致伸缩位移传感器是专為U型吊环液压缸又或是受空间限制的液压缸而设计。它的绝对位置值被编码成模拟输出或SSI的二进制码或格雷码并且通过串行的RS422标準传送到控制器。配合精确液压缸及控制阀便组成一个高标準的闭环控制系统。

  It adopts the non-contact magnetostrictive to provide feedback of fluid level and multi-interface level of a storage tank or process vessel. The non-contact feature provides exceptional ease of installation and guaratees almost unlimited mechanical life expectancy. The high versatile IP67 profile housing offers full protection against outside agents for use in harsh environments with high contamination and presence of dust.

  在产品的性能上是采用非接触式磁悬浮测量技术。此技术能提供高精準、高可靠性、稳定性高、直接和绝对值的位移输出。非接触式设计不但方便安装,而且能消除所有工作磨损而带来的误差,无须重新标定,无须定期维护。电子部份为IP65等级,使电子模块受到最佳的抗震,防尘和防潮保护。

Online Services