油缸磁致伸缩位移传感器

我司为Germanjet磁致伸缩位移传感器中国经销商,位移传感器棒形设计允许传感器安装在带有压力的液压缸和气压缸内。非接触式O型磁块可使位移传感器安装更为简单。除提供标准的模拟量电压和电流信号外,还提供诸如同步串行接口 SSI以及启动 / 停止脉冲这些常用接口,还具有现场总线的Canbus和Profibus以及Devicenet。

油缸磁致伸缩位移传感器

拉绳位移传感器

拉绳位移传感器是直线位移传感器在结构上的精巧集成,充分结合了角度位移传感器、直线位传感器以及齿轮、条传动的各种优点。做工精良,用料考究:传感器壳体采用硬质铝合金材质并进行阳极氧化处理,有效达到防锈防污效果;固定所用螺丝都选用高硬度合金钢材质,使得传感器更加结实牢靠。

拉绳位移传感器

17 series位移传感器简介

2015-4-27 10:02:15

  17 Series levitation displacement sensor is designed specifically forhydraulic cylinders. Hex flange outer tube and pressureTo loo% stainless steel, can be installed directly into the hydraulic tank.Electronics modulewith pressure to the outer tube Assembly design, which can be completely separated the two are, in exceptional cases,simply dial into the electronic partHuai-line school, but do not need to be separated from the outer tube pressure hydraulic cylinders. This design reduces the time to reset thehydraulic cylinder, largeGreatly improve production efficiency.

  17系列磁致伸缩位移传感器是专为液压缸而设计。耐压外管与六角法兰为loo%不锈钢,可以直接安装进液压缸里。电子部分与耐压外管为模块组装设计,即两都都可完全分离,在特殊情况下,只需拨出电子部分进行校淮,而耐压外管无需与液压缸分离。此设计减少重置液压缸时间,大大提高生产效率。

  Electronic part IPE7 level (needs with the correct connector),the electronic module being the best anti-Shock, dust and moisture protection.Lin received the industry's output common oil system plug (DIFI43650), both Convenient and easy wiring. In addition to suitable hydraulic systems,'m equally suitable for external mechanical installation,No periodic maintenance case, absolute analog voltage output.

  电子部分为IPE7等级(需要配合正确的接头),使电子模块受到最佳的抗震,防尘和防潮保护。输出莲接为业界常用的油制插头(DIFI43650),既方便又容易接线。除了适合液压系统外,敢同样适合机械外置安装,在无需定期维护情况下,提供绝对模拟电压输出。

Online Services